how to share internet connection between two computers

development of the Internet is increasingly many are using the internet. when the whole world have been using the internet, whether it's sending email, social networks, browsing, blogging, and many more. There are also some people who use the internet for a living, and the proof is also someone who is rich from running a business on the internet. current internet connection to remote villages has reached only by using a modem and a GSM operator card. and currently just one more easy using the internet. but how if only you who have an internet connection, in because your friend does not have a device to access the internet but he already has a laptop?

ok in this post I will share a tips of how to share internet connection between two computers  please follow the steps below:

To share Internet configuration settings:
On the Host Computer (Yg installed modem / main PC)

1. Go to Control panel

2. Click Network and Internet Connections -> Network Connections

3. Right-click the connection that you use to connect to the internet. For example, if you connect to the internet using a modem, right-click the connection that you want under Dial-up.

4. click Properties -> Advanced tab

5. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection.

6. If you share a dial-up Internet connection, select the Establish a dial-up connection Whenever a computer on my network attempts to access the Internet and then click OK.

7. After that will appear a message

When Internet Connection Sharing is enabled, your LAN adapter Will be set to use
IP address 192.168.0.1. Your computer may lose connectivity with other computers on
your network. If these other computers have static IP addresses, it is a good idea to set Them
to Obtain Their IP addresses automatically. Are you sure you want to enable Internet
Connection Sharing?

8. click YES. The connection to the Internet is shared to other computers on local area networks (LANs). Network adapter that is connected to the LAN is configured with a static IP address 192.168.0.1 and subnet mask of 255.255.255.0

On the client computer (PC only)

To connect to the Internet by using a shared connection, you must confirm the LAN adapter IP configuration, then configure the client computer. To confirm the LAN adapter IP configuration, follow these steps:

1. Go to Control panel

2. Click Network and Internet Connections -> Network Connections

3. Click Local Area Connection -> Properties -> General Tab

4. Click Internet Protocol (TCP / IP) in the list This connection uses the following items -> click properties

5. In the dialog box for Internet Protocol (TCP / IP) Properties, click Obtain an IP address automatically (if not already selected) and OK.

nb: You can also assign a static IP address in the range 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway:

IP Address 192.168.0.2
Subnet mask of 255.255.255.0
Default gateway is 192.168.0.1

6. In the Local Area Connection Properties click OK.

To configure client computers to use the shared Internet connection, follow these steps:

1. Go to Control panel

2. Click Network and Internet Connections

3. click Internet Options

4. on the Internet Properties dialog box dialog box, click the Connections tab.

5. Wizard starts click Setup.Connection

6. In the New Connection Wizard page -> next

7. Click Connect to the Internet -> next

8. Click Set up my connection manually -> next

9. Click Connect using a broadband connection That is always on -> next

10. After Completing the New Connection Wizard, click Finish

So much good this time wrote a computer tips, good luck ..:)

thank you for reading my article how to share internet connection between two computers

regards http://geoftechnology.blogspot.com