cause windows bluescreen

bluescreen. If you are a frequent computer who tinkers with the term of course you know this or you've got it. but what about a novice. of course you are very concerned with your computer if something is happening but it can be overcome by looking at what the cause of the bluescreen. please read my article below:

• IRQL_NOT_LESS_OR_EQUAL (0x0000000A)

This error most commonly appears in the event of the Blue Screen.This error message is usually caused because there is a mismatch driver installed on your computer.The cause:- Drivers that clash or do not match- Problems with the Video Card, this includes the overclocked video card that exceeds the limit or you've changed your Video card and Video card not uninstalling the old drivers from the chipset is different- Problems on the Audio Card, including configuration errors or bugs in the sound card drivers

• NTFS_FILE_SYSTEM or FAT_FILE_SYSTEM (0x00000024) or (0X00000023)

This error message at least have a little give an idea where the damage is located, which is in a partition or filesystem but not in HD.We can check by check or PATA or SATA cable can check the partition with chkdsk tool.

• UNEXPECTED_KERNEL_MODE_TRAP (0x0000007F)

When you get an error message like this, can be caused by:- Excessive Hardware Overclock- Components of a computer that is too hot- BIOS is corrupt- Memory and CPU is disabled

• DATA_BUS_ERROR

This error message is caused because of the possibility that memory or the memory slot on the motherboard is damaged.

• PAGE_FAULT_IN_NONPAGED_AREA

This error message is caused due to hardware damage, including main memory, video card memory, or memory in the processor (L2 Cache)

• INACCESSIBLE_BOOT_DEVICE

This error message is caused due to an error in the configuration jumpers the wrong hard drive, boot sector virus, the wrong IDE controller drivers, or chipset driver error.

• VIDEO_DRIVER_INIT_FAILURE

This error message is caused due to an error occurs on the video card driver installation is less than perfect, restart during installation or can also occur because of errors in the installation of the driver.

• BAD_POOL_CALLER

This error message is caused because of this error can occur because of errors or incompatible drivers. Often occurs when installing XP from an upgrade, or not from the new installation.

• PEN_LIST_CORRUPT

This error message is caused due to damage to RAM

• MACHINE_CHECK_EXCEPTION

This error message is caused by a defect in the CPU, or an aggressively overclocked, and power supply shortages or damaged resources.

if you already know the cause of the bluescreen surely you already know what you should do. accepted the love for reading my article and if you like it please comment or share to your friends.
best regards http://geoftechnology.blogspot.com 

More about → cause windows bluescreen

blog pagerank prediction

hello all you want to thank you for reading my article is a blog pagerank prediction. maybe when you have a blog you definitely want to get a pagerank on your blog because of pagerank indicate that the articles in our blog is already indexed in google and blogs we are given an award, the pagerank.

PageRank also mendandakan if we've got that's for sure pagerank blog we already have many visitors and that is the target most or all of the bloggers that exist in this world, because of the many visitors to our blog was a successful owner of the blog.

blog if we have 50% more visitors we can succeed in doing business online google adsense for example. ok below I will give a tips that can see your pagerank and also predict pagerank your blog. please visit the link below:

http://www.seomastering.com/pagerank-prediction.php


if you like my articles please comment or share with your friend....
best regards http://geoftechnology.blogspot.com

More about → blog pagerank prediction

how to fix error 5200 on printer canon IP2770

ok to start this fine day I will give you tricks on how to fix a printer that has an error 5200

My post this time is how to fix error 5200 on printer canon IP2770. is my personal experience and is very confused at that time to fix it. and after I was browsing on google I found the trick and it turns out, the trick is going well and I finally managed to fix the printer. in this case I experienced something on the Canon IP2770 printer brands.

Usually This error message 5200 appears when we want to do a print document and image as below:

Here is how to resolve error 5200 on printer iP2770 at the time of the printing process will be conducted:

•     The printer is off and plugged the power cord.

•     Press the RESUME button for 3 seconds (fixed hold) then press the POWER button until the green light turns on.

•     Release the Resume button, the POWER remained in detention.

•     POWER button is still in state custody, press the Resume button 5 times. (Led will menyalan turns orange, green .. and the last flame is orange).

•     Then release both buttons simultaneously.

•     Led will blink a moment and then will glow green.

•     The computer will detect the new printer hardware, ignore it and wait a moment to complete the detection of these new printers.

•     Turn off the printer by pressing the POWER button.

•     Press the POWER button again then turn the printer back and ready for reuse.

However, the way I did resolve the error 5200 on the iP2770 printer is in the following way:

•     Turn on the printer and the printer will look normal.

•     Run the printer by printing a document or a test print, it will be seen in small windows error message 5200.

•     Open the printer cover, then the cartridge will ketengah. In this position, unplug the power cord without pressing the on-off button (power button).

•     Remove the cartridge from any place and leave the lid open.

•     Replace the printer cable and turn on the printer.

•     Head will shift and hit the left and to right because the lid is still open, but akanberhenti middle.

•     Replace all the cartridges, and close properly.

•     The printer will return to normal.

May be useful. n thank you because you want to read my articles if you like my article how to fix error 5200 on printer canon IP2770 please your comment or share with your friend thanks. best regards http://geoftechnology.blogspot.com

More about → how to fix error 5200 on printer canon IP2770

disable autorun

in this post I will give you a tip how to disable autorun. a little explanation about autorun. Autorun or autoplay is a facility that functions in the operating system running the file automatically when the media such as CD-ROM, DVD-ROM, Flash disks and other insert / plug in the computer. So when the media is inserted, without our running any kind, there is a program that will automatically run itself. This feature is commonly utilized in the Driver CD that came with when buying a motherboard / VGA. But no doubt even now used as a medium for spreading the virus, mainly through flash.

AutoRun is also very influential on the computer's performance. because if autorun on a particular computer is active then when we insert flash media or cd-rom and it turns out it's the media that we put in it is stored or infected by a virus so if autorunnya automatically activated virus will immediately react in our computer system and it greatly interfere with the performance computers and over time the virus will be more and more because the virus multiplies and consequently if it is too much we have to reinstall the operating system eg Windows XP, Vista, 7, etc..

and when we turned off autorun on your computer then when we insert a media such as flash, cd-room, external hard drive etc, then the virus will likely not be the way it is because the virus usually infects our computers when we autorunnya active on the computer. and below I will give you a way how to disable autorun. follow below:

Please press windows R then type GPEDIT.MSC n follow the image
 c
is easy if you like my rticles please your comment best regards http://geoftechnology.blogspot.com

More about → disable autorun

how to remove autorun.inf

Hello alls blogger. How are you today I hope you are fine. at this time, my posting about computer tips  I will give you some tips on your computer about how to remove autorun.inf. Probably most of us already know what it Autorun.inf, but I'm sure there are many who do not yet know or understand still less precise about the file autorun.inf. therefore I will explain glimpse of the autorun read below:

Autorun or autoplay is a facility that functions in the operating system running the file automatically when the media such as CD-ROM, DVD-ROM, Flash disks and other insert / plug in the computer. So when the media is inserted, without our running any kind, there is a program that will automatically run itself. This feature is commonly utilized in the Driver CD that came with when buying a motherboard / VGA. But no doubt even now used as a medium for spreading the virus, mainly through flash. Especially with the use of the flash that has been like mushrooms in rainy season ..

While the file Autorun.inf itself is a file that contains specific instructions about what is automatically executed when the media such as flash / CD is inserted into the computer. These instructions may include a command to run the exe file. If you want to know how to remove autorun.inf follow:

Open CMD (start-run-write CMD)

Typing the following command "RD / S / Q \ \. \ F: \ autorun.inf"

Finish and see the results

information

RD no command from CMD to Remove Dir

/ S / Q is a parameter that we use

\ \. \ J: \ is the drive  or location of autorun.inf

Autorun.inf is the folder in question

want to ask how the second script, duh sorry yes this already given .. yuk ...

Shell "cmd / c rd / s / q \ \. \ J: \ autorun.inf"

if you like my articles please your share on your friend, facebook,twitter or etc. thank for read my articles how to remove autorun.inf  regards geoftechnology.blogspot.com

More about → how to remove autorun.inf

command prompt command

HEI brow how are you..? ok on this posti will share a command prompt command list if you like use a command prompt please follow on my post command prompt command on the below :
  command list Ms-DOS Prompt Os Windows :

ADDUSERS Helps Add or list users to/from a CSV file
ARP Address Resolution Protocol
ASSOC Change file extension associations
ASSOCIAT One step file association
AT Schedule a command to run at a later time
ATTRIB Change file attributes

BOOTCFG Edit Windows boot settings
BROWSTAT Get domain, browser and PDC info

CACLS Change file permissions
CALL Call one batch program from another
CD Change Directory - move to a specific Folder
CHANGE Change Terminal Server Session properties
CHKDSK Check Disk - check and repair disk problems
CHKNTFS Check the NTFS file system
CHOICE Accept keyboard input to a batch file
CIPHER Encrypt or Decrypt files/folders *
CleanMgr Automated cleanup of Temp files, recycle bin
CLEARMEM Clear memory leaks
CLIP Copy STDIN to the Windows clipboard.
CLS Clear the screen
CLUSTER Windows Clustering
CMD Start a new CMD shell
COLOR Change colors of the CMD window
COMP Compare the contents of two files or sets of files
COMPACT Compress files or folders on an NTFS partition
COMPRESS Compress individual files on an NTFS partition
CON2PRT Connect or disconnect a Printer
CONVERT Convert a FAT drive to NTFS.
COPY Copy one or more files to another location
CSVDE Import or Export Active Directory data

DATE Display or set the date
Dcomcnfg DCOM Configuration Utility
DEFRAG Defragment hard drive
DEL Delete one or more files
DELPROF Delete NT user profiles
DELTREE Delete a folder and all subfolders
DevCon Device Manager Command Line Utility
DIR Display a list of files and folders
DIRUSE Display disk usage
DISKCOMP Compare the contents of two floppy disks
DISKCOPY Copy the contents of one floppy disk to another
DNSSTAT DNS Statistics
DOSKEY Edit command line, recall commands, and create macros
DSADD Add user (computer, group..) to active directory
DSQUERY List items in active directory
DSMOD Modify user (computer, group..) in active directory

ECHO Display message on screen
ENDLOCAL End localisation of environment changes in a batch file
ERASE Delete one or more files
EXIT Quit the CMD shell
EXPAND Uncompress files
EXTRACT Uncompress CAB files

FC Compare two files
FDISK Disk Format and partition
FIND Search for a text string in a file
FINDSTR Search for strings in files
FOR Loop command: all options Files, Directory, List
FORFILES Batch process multiple files
FORMAT Format a disk
FREEDISK Check free disk space (in bytes)
FSUTIL File and Volume utilities
FTP File Transfer Protocol
FTYPE Display or modify file types used in file extension associations

GLOBAL Display membership of global groups
GOTO Direct a batch program to jump to a labelled line

HELP Online Help
HFNETCHK Network Security Hotfix Checker

IF Conditionally perform a command
IFMEMBER Is the current user in an NT Workgroup
IPCONFIG Configure IP

KILL Remove a program from memory

LABEL Edit a disk label
LOCAL Display membership of local groups
LOGEVENT Write text to the NT event viewer.
LOGOFF Log a user off
LOGTIME Log the date and time in a file

MEM Display memory usage
MD Create new folders
MODE Configure a system device
MORE Display output, one screen at a time
MOUNTVOL Manage a volume mount point
MOVE Move files from one folder to another
MOVEUSER Move a user from one domain to another
MSG Send a message
MSIEXEC Microsoft Windows Installer
MSINFO Windows NT diagnostics
MSTSC Terminal Server Connection (Remote Desktop Protocol)
MUNGE Find and Replace text within file(s)
MV Copy in-use files

NET Manage network resources
NETDOM Domain Manager
NETSH Configure network protocols
NETSVC Command-line Service Controller
NBTSTAT Display networking statistics (NetBIOS over TCP/IP)
NETSTAT Display networking statistics (TCP/IP)
NOW Display the current Date and Time
NSLOOKUP Name server lookup
NTBACKUP Backup folders to tape
NTRIGHTS Edit user account rights

PATH Display or set a search path for executable files
PATHPING Trace route plus network latency and packet loss
PAUSE Suspend processing of a batch file and display a message
PERMS Show permissions for a user
PERFMON Performance Monitor
PING Test a network connection
POPD Restore the previous value of the current directory saved by PUSHD
PORTQRY Display the status of ports and services
PRINT Print a text file
PRNCNFG Display, configure or rename a printer
PRNMNGR Add, delete, list printers set the default printer
PROMPT Change the command prompt
PsExec Execute process remotely
PsFile Show files opened remotely
PsGetSid Display the SID of a computer or a user
PsInfo List information about a system
PsKill Kill processes by name or process ID
PsList List detailed information about processes
PsLoggedOn Who’s logged on (locally or via resource sharing)
PsLogList Event log records
PsPasswd Change account password
PsService View and control services
PsShutdown Shutdown or reboot a computer
PsSuspend Suspend processes
PUSHD Save and then change the current directory

QGREP Search file(s) for lines that match a given pattern.

RASDIAL Manage RAS connections
RASPHONE Manage RAS connections
RECOVER Recover a damaged file from a defective disk.
REG Read, Set or Delete registry keys and values
REGEDIT Import or export registry settings
REGSVR32 Register or unregister a DLL
REGINI Change Registry Permissions
REM Record comments (remarks) in a batch file
REN Rename a file or files.
REPLACE Replace or update one file with another
RD Delete folder(s)
RDISK Create a Recovery Disk
RMTSHARE Share a folder or a printer
ROBOCOPY Robust File and Folder Copy
ROUTE Manipulate network routing tables
RUNAS Execute a program under a different user account
RUNDLL32 Run a DLL command (add/remove print connections)

SC Service Control
SCHTASKS Create or Edit Scheduled Tasks
SCLIST Display NT Services
ScriptIt Control GUI applications
SET Display, set, or remove environment variables
SETLOCAL Control the visibility of environment variables
SETX Set environment variables permanently
SHARE List or edit a file share or print share
SHIFT Shift the position of replaceable parameters in a batch file
SHORTCUT Create a windows shortcut (.LNK file)
SHOWGRPS List the NT Workgroups a user has joined
SHOWMBRS List the Users who are members of a Workgroup
SHUTDOWN Shutdown the computer
SLEEP Wait for x seconds
SOON Schedule a command to run in the near future
SORT Sort input
START Start a separate window to run a specified program or command
SU Switch User
SUBINACL Edit file and folder Permissions, Ownership and Domain
SUBST Associate a path with a drive letter
SYSTEMINFO List system configuration

TASKLIST List running applications and services
TIME Display or set the system time
TIMEOUT Delay processing of a batch file
TITLE Set the window title for a CMD.EXE session
TOUCH Change file timestamps
TRACERT Trace route to a remote host
TREE Graphical display of folder structure
TYPE Display the contents of a text file

USRSTAT List domain usernames and last login

VER Display version information
VERIFY Verify that files have been saved
VOL Display a disk label

WHERE Locate and display files in a directory tree
WHOAMI Output the current UserName and domain
WINDIFF Compare the contents of two files or sets of files
WINMSD Windows system diagnostics
WINMSDP Windows system diagnostics II
WMIC WMI Commands

XCACLS Change file permissions
XCOPY Copy files and folders
This list is not exhaustive . Most commands will work well, however please don’t fume up as some of these might not work on your machine due to version dependencies

if you like my articles command prompt command please you share on facebook,twitter or etc. share with your friend ok. regards http://geoftechnology.blogspot.com

More about → command prompt command

Free PowerPoint template – Making your presentation more effective

Many of us have to make PowerPoint presentations to convey ideas more effectively. Many students also have to make presentations for their projects. Making an effective presentation is very important. The presentation not only becomes effective because of the content it carries, but also because of the way it looks and feels. It is very important that your audience can connect with you and your presentation and this can be effectively done with the help of free PPT template. A template for PowerPoint is actually a set of graphics laid on the blank view of PowerPoint. PowerPoint template does a lot to help you make an effective presentation. Firstly, you get to choose a specific template for your presentation. This helps your audience connect with your audience in a more effective and efficient manner. If you choose the template, such that it complements the subject matter of your presentation, than the look of the presentation would be more pleasing and the audience would also be able to connect with it in a much better way.

Secondly, a good template would also help you develop confidence about the things you are going to present, hence helping you in delivering an effective presentation all together. A free PowerPoint template is one way to impress your audience.

There are thousands of designs which you can choose from the internet and download with just a click. They are very easy to use and you do not need to be an expert to use them. They are used similarly the actual PowerPoint is used. You can also have custom designed free PPT template for your presentation. Many websites also provide this service for the convenience of their users. There are many websites which may also provide templates which have to be paid for use.

You will surely find a free PowerPoint template that suits your requirement. Templates are available very easily. There are many websites providing free PowerPoint templates. You should always be a little careful before choosing the website from where you wish to download the template. Make sure that the template is not available only for a trial period and is not copyrighted. Always remember, that the way your presentation looks will have an impact on the way your audience perceives your work and the subject matter of your presentation. If you are looking to deliver an effective presentation, it is always advised that you use a good template which suits your subject matter.

get a free powerpoint template http://www.freeppttemplate.com
Free PowerPoint template

More about → Free PowerPoint template – Making your presentation more effective

understanding of the processor

Processor is often referred to as the brain and the central control computer which is supported by other kompunen. Processor is an IC that controls the whole course of a computer system and used as a center or brain of the computer that functions to perform calculations and execute tasks. Processor socket located on that has been provided by the motherboard, and can be replaced with another processor provided in accordance with the existing socket on the motherboard. One of the very large effect on computer speed and capacity depending on the type of processor.

The processor is a chip that is often called "Microprosessor" which now has reached processor1ukurannya Gigahertz (GHz). The measure is a count of the processor speed in processing the data or information. Brands are more outstanding dipasatan processor is AMD, Apple, VIA Cyrix, IBM, IDT, and Intel. Part of Processors The most important part of the processor is divided into three, namely:

    * Aritcmatics Logical Unit (ALU)
    * Control Unit (CU)
    * Memory Unit (MU)
History of microprocessors
Starting from here:
1971: 4004 Microprocessor
In 1971 comes the first microprocessor Intel 4004 microprocessor is used on the machine Busicom calculator. With this discovery opens the way to incorporate artificial intelligence in inanimate objects.
1972: 8008 Microprocessor
In 1972 comes the 8008 microprocessor, a powerful 2-fold from its predecessor the 4004.
1974: 8080 Microprocessor
Into the brain of a computer called the Altair, at that time sold about ten thousand in a month
1978: 8086-8088 Microprocessor
An important sale in the computer division occurs in products for personal computers made by IBM that uses a processor 8088 which managed to push up the name of intelligence.
1982: 286 Microprocessor
Intel 286 or better known by the name of 80 286 is a first processor that can recognize and use the software used for the previous processor.
1985: Intel386 ™ Microprocessor
Intel 386 is a processor that has an embedded diprosessor 275,000 transistors which when compared with 4004 has a 100-fold more compared with 4004
1989: Intel486 ™ DX CPU Microprocessor
Processor is the first time allows a variety of applications that had been typing the command-command should be just a click only, and has a complex mathematical functions that reduce the workload on the processor.
1993: Intel ® Pentium ® ProcessorThe new generation of processors that can handle different types of data such as voice, sound, handwriting, and photographs.
1995: Intel ® Pentium ® Pro Processor
Processor is designed for use on the server and workstation applications, are made to process data quickly, this processor has a 5.5 jt transistors are embedded.
1997: Intel ® Pentium ® II Processor
Pentium II processor is an Intel MMX processor that combines specially designed to process video data, audio, and graphics efficiently. There are 7.5 million transistors integrated in it, so with this processor PC users can process a variety of data and use the internet better.
1998: Intel ® Pentium II Xeon ® Processor
Processor made for the needs of the application server. Intel's strategy was to fulfill that wish to provide a unique processor for a particular market.
1999: Intel ® Celeron ® Processor
Processor Intel Celeron processor is issued as a processor that is intended for users who do not really need a faster processor performance for users who want to build a computer system with a budget (prices) are not too large. Intel Celeron processor has the same shape and formfactor with an Intel Pentium type, but only with the instructions a little more, its L2 cache is smaller, the speed (clock speed) is slower, and cheaper than an Intel processor Pentium type. With this release of the Intel Celeron processor back to a processor for a particular market.
1999: Intel ® Pentium ® III Processor
Pentium III processor is a processor with an added 70 new instructions that dramatically enhance the ability of high-level imaging, three-dimensional, streaming audio, and video applications as well as voice recognition.
1999: Intel ® Pentium ® III Xeon ® Processor
Intel re-penetrated market of servers and workstations by issuing a series of Pentium III Xeon, but the type that has 70 SIMD command. The advantages of this processor is that it can speed up the processing of information from the system bus to the processor, which also boost performance significantly. This processor is also designed to be combined with other similar processors.
2000: Intel ® Pentium ® 4 Processor
Processor Intel Pentium IV is a product that speeds up the process is capable of penetrating speed of 3.06 GHz. First time out with a 1.5GHz processor speed formafactor pin 423, after it changed intel Intel Pentium 4 processor formfactor becomes pin 478 which starts from an Intel Pentium 4 1.3 GHz speed up the latest that is currently able to penetrate up to 3.4 GHz speed.
2001: Intel ® Xeon ® Processor
Intel Pentium 4 Xeon processor is an Intel Pentium 4 processors that are specific to act as a server computer. This processor has a number of pins more than the Intel Pentium 4 processor with a memory and a larger L2 cache as well.
2001: Intel ® Itanium ® Processor
Is the first Itanium-based 64-bit processor intended for usage on servers and workstations as well as specific users. This processor is built with a structure completely different from the previous design and technology based on Intel's Explicitly Parallel Instruction Computing (EPIC).
2002: Intel ® Itanium ® 2 Processor
Itanium 2 is the second generation of the Itanium family
2003: Intel ® Pentium ® M Processor
855 chipset, and Intel ® PRO / WIRELESS 2100 is a component of Intel ® Centrino ™. Intel Centrino is made to meet the market needs of the existence of a computer that is easy to carry anywhere.
2004: Intel Pentium M processors 735/745/755
Equipped with the 855 chipset with new features 2Mb L2 cache, 400MHz system bus and processor socket compatibility with the Pentium M series before.
2004: Intel E7520/E7320 Chipsets
7320/7520 can be used for dual processor configuration with 800MHz FSB, DDR2 400 memory, PCI Express peripherals and interfaces.
2005: Intel Pentium 4 Extreme Edition 3.73GHz
A processor aimed at the market of computer users who want something more from their computers, the processor uses the configuration of frequency 3.73GHz, 1.066GHz FSB, EM64T, 2MB L2 cache, and hyperthreading.
2005: Intel Pentium D 820/830/840
Based on 64 bit processor and are called dual core because it uses 2 core, with 1MB of L2 cache configuration for each core, 800MHz FSB, and can operate at a frequency of 2.8GHz, 3.0GHz, and 3.2GHz. On the processor type is also included support HyperThreading.
2006: Intel Core 2 Quad Q6600
Processors for desktop and type used in people who want more power than the computer that he has has 2 cores with a 2.4GHz configuration with 8MB of L2 cache (up to 4MB accessible per core), 1.06GHz Front-side bus, and thermal design power (TDP)
2006: Quad-core Intel Xeon X3210/X3220Processor is used to type the server and has 2 cores with each having the configuration 2.13 and 2.4GHz, respectively, with 8MB of L2 cache (4MB can achieve that is accessible to each core), 1.06GHz Front-side bus, and thermal design power (TDP

thank you because you want red my article understanding of the processor. if you like my article understanding of the processor please comment from below. regards geoftechnology.blogspot.com

More about → understanding of the processor

how to lock folder

ok in this post I will try to give a knowledge of how to lock folder without using software . if you have important data, whether it's office work, the course material, music files, videos, pictures and others. maybe when you store your data in a folder or directory that you think it's safe, and nothing else to find it or delete it, but could someone find a folder or file and then delete it.

therefore I will try to make a post about how to lock folders This way is very easy to do because you just copy and paste. because of that I will give it the form of source code. ok please follow the how to lock the folder below:

open notepad on your computer then copy and pasti code from below :

-------------------------------------------------------------------

cls

@ECHO OFF

title Folder Locker

if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK

if NOT EXIST Locker goto MDLOCKER

:CONFIRM

echo Are you sure you want to Lock the folder(Y/N)

set/p "cho=>"

if %cho%==Y goto LOCK

if %cho%==y goto LOCK

if %cho%==n goto END

if %cho%==N goto END

echo Invalid choice.

goto CONFIRM

:LOCK

ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

echo Folder locked

goto End

:UNLOCK

echo Enter password to Unlock folder

set/p "pass=>"

if NOT %pass%==x goto FAIL

attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"

ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker

echo Folder Unlocked successfully

goto End

:FAIL

echo Invalid password

goto end

:MDLOCKER

md Locker

echo Locker created successfully

goto End

:End

---------------------------------------------------------------

and from the above code which says if NOT% pass% == x goto FAIL you please replace the letter X as a password that you want. If you complete to copy on your notepad,  save with the file name up to you and then type the file select all files. type a file name that you want but the extension must be *. bat samples locker.bat

after everything is finished you please open the file that you created sebelumnya.setelah you open it will display the folder LOCKER then save important data that you want to secure. then reopen the file you created earlier type Y and enter then you have successfully hidden your file because it is only you who know the password. then for even safer please change the file extension back into Locker.msc or Locker.dll and set propertisnya be hidden.

accepted the love for reading my post is how to lock folders and if you like do not forget to comment for this blog development. regards geoftechnology.blogspot.com

More about → how to lock folder

how to know blog dofollow or nofollow

first thank you because you want to read my article how to know blog dofollof or nofollow. the times make the person whose name is more like the internet and also more and more blogs are scattered on the internet, whether it's a free blog etc.

you may also already have a blog or site but do you know that your site or blog is a nofollow or nofollow? and in my article this time I will try to give tips how to know blog dofollow or nofollow.

ok please read the following tips:

please download add-ons mozilla firefox and the nama is donofollow. To download click here

if you download is complete please your install on your mozilla firefox and restart your mozilla firefox. If you already restart your mozilla firefox, right click your mouse and choose nodofollow see the screenshoot.

If you already choose nodofollow, if the link you are blue in your blog then your blog or website that is dofollow blogs and if the link you are red/pink then your blog or website that is nofollow.

it is very easy to find blogs that dofollow or nofollow. thank you for reading my article if your like the article please comment on the below. regards geoftechnology.blogspot.com

More about → how to know blog dofollow or nofollow

how to share internet connection between two computers

development of the Internet is increasingly many are using the internet. when the whole world have been using the internet, whether it's sending email, social networks, browsing, blogging, and many more. There are also some people who use the internet for a living, and the proof is also someone who is rich from running a business on the internet. current internet connection to remote villages has reached only by using a modem and a GSM operator card. and currently just one more easy using the internet. but how if only you who have an internet connection, in because your friend does not have a device to access the internet but he already has a laptop?

ok in this post I will share a tips of how to share internet connection between two computers  please follow the steps below:

To share Internet configuration settings:
On the Host Computer (Yg installed modem / main PC)

1. Go to Control panel

2. Click Network and Internet Connections -> Network Connections

3. Right-click the connection that you use to connect to the internet. For example, if you connect to the internet using a modem, right-click the connection that you want under Dial-up.

4. click Properties -> Advanced tab

5. Under Internet Connection Sharing, select the Allow other network users to connect through this computer's Internet connection.

6. If you share a dial-up Internet connection, select the Establish a dial-up connection Whenever a computer on my network attempts to access the Internet and then click OK.

7. After that will appear a message

When Internet Connection Sharing is enabled, your LAN adapter Will be set to use
IP address 192.168.0.1. Your computer may lose connectivity with other computers on
your network. If these other computers have static IP addresses, it is a good idea to set Them
to Obtain Their IP addresses automatically. Are you sure you want to enable Internet
Connection Sharing?

8. click YES. The connection to the Internet is shared to other computers on local area networks (LANs). Network adapter that is connected to the LAN is configured with a static IP address 192.168.0.1 and subnet mask of 255.255.255.0

On the client computer (PC only)

To connect to the Internet by using a shared connection, you must confirm the LAN adapter IP configuration, then configure the client computer. To confirm the LAN adapter IP configuration, follow these steps:

1. Go to Control panel

2. Click Network and Internet Connections -> Network Connections

3. Click Local Area Connection -> Properties -> General Tab

4. Click Internet Protocol (TCP / IP) in the list This connection uses the following items -> click properties

5. In the dialog box for Internet Protocol (TCP / IP) Properties, click Obtain an IP address automatically (if not already selected) and OK.

nb: You can also assign a static IP address in the range 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway:

IP Address 192.168.0.2
Subnet mask of 255.255.255.0
Default gateway is 192.168.0.1

6. In the Local Area Connection Properties click OK.

To configure client computers to use the shared Internet connection, follow these steps:

1. Go to Control panel

2. Click Network and Internet Connections

3. click Internet Options

4. on the Internet Properties dialog box dialog box, click the Connections tab.

5. Wizard starts click Setup.Connection

6. In the New Connection Wizard page -> next

7. Click Connect to the Internet -> next

8. Click Set up my connection manually -> next

9. Click Connect using a broadband connection That is always on -> next

10. After Completing the New Connection Wizard, click Finish

So much good this time wrote a computer tips, good luck ..:)

thank you for reading my article how to share internet connection between two computers

regards http://geoftechnology.blogspot.com

More about → how to share internet connection between two computers

how to find hidden files

thank you for willing to read my post How to find hidden files. You must be annoyed if you find files that exist on your computer and hold the file you are looking for do not you find, when you know where you save the file on your computer. and you did not feel that you never delete it.

and you should know that your file can be hidden by your friends or your files hidden by the virus.

 ok according to the title How to find hidden files I'll tell you a few tips for finding hidden files on the computer, and how to find these hidden files have two ways. but first we must know first, whether it's hidden files hidden by the user himself or the file is hidden by the virus. but if you do not know if the file is hidden by the user or a virus this way can also be done.

please follow the way below:

Your files are hidden by your friend by setting properties

open windows explorer -> tools (if windows 7 press alt first) -> folder options -> select the view tab then check show hidden files then click ok

and the second way if a virus that hides your files

start -> run -> type “cmd” without quotes then you are automatically taken to a new window is the command prompt window

at the command prompt search for the drive where you store files that are hidden by the virus. if you want to go on drive D see script below:

to enter the drive type C = Cd \
to enter into dirve D = D type:
to enter into dirve E = type E:
and so on

if you have entered in the drive that you want then type "attrib-s-h / s / d" without quotes. if you do not know what you have entered in the drive that you want, below I give an example if the image has made it into drive D:

 

thank you for reading my articles how to find hidden files if like my articles please your comment. regards geoftechnology.blogspot.com

More about → how to find hidden files